Panasonic KX-TDA50 Programming Manual page 19

a.
b.
c.
d.
3.
Click OK.
Maintenance Console will start, and automatically connect to the PBX. If this is the first time that
Maintenance Console has connected to the PBX, and the date and time of the PBX have not yet
been set, the Quick Setup wizard will run. For more details, see Starting the KX-TDA
Maintenance Console and Assigning the Basic Items (Quick Setup).
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate
Modem Initialize
1 : T, P and W can only be entered when using MPR Software File Version 3.2000 or later.
*
Enter the system password for the PBX.
Click Setup.
Specify the settings as required. For more details, see the tables below.
Click OK.
Values
COMx
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Values
1-9, 0, *, #, "," [comma],
1
T, P, W*
Auto(Tone),
Auto(Pulse), Manual
–
COMx
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
–
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
Explanation
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and click
Initialize to send the command to the modem.
For more details, refer to your modem's
instruction manual.
PC Programming Manual
2.1 Introduction
19