Connection Settings for LAN
Setting
Port Number
2.3.7
Connect—Disconnect
Closes the connection between the Maintenance Console and the PBX. When this option is chosen,
system data is automatically backed up from the PBX to the SD memory card (see 2.4.1 Tool—SD
memory backup).
To disconnect
1.
From the Connect menu, select Disconnect.
A confirmation message will be displayed.
2.
Click Yes.
Values
10000–65535
Explanation
Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.7.28 [1-1] Slot—CTI-LINK Card Property
(KX-TDA100/KX-TDA200/KX-TDA600 only)
or 2.7.19 [1-1] Slot—IP-GW Card Property
(KX-TDA50 only).
PC Programming Manual
2.3 Connect
39