Panasonic KX-TDA50 Programming Manual page 599

Value Range
Max. 20 characters
Maintenance Console Location
2.12.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
1.16.4 Speed Dialing, System
CO Line Access Number + Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned
to the System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.12.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
1.16.4 Speed Dialing, System
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone
number are routed. If a Caller ID Modification Table is being used, the modified number must match
the telephone number above (CO Line Access Number + Telephone Number) in order for the call
to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.12.1 [6-1] System Speed Dial
2.12 [6] Feature
PC Programming Manual 599