Panasonic KX-TDA50 Programming Manual page 338

2.8 [2] System
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Mark Signal bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Default
180 bits
Value Range
10 × n (n=3–40) bits
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Channel Seizure Wait Time
Specifies the length of time that the PBX waits before starting to send the seizure signal following the
first ring when sending Caller ID information to an SLT.
Default
512 ms
Value Range
64 × n (n=5–35) ms
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
338 PC Programming Manual