Utility; Utility-Diagnosis - Panasonic KX-TDA50 Programming Manual

2.5 Utility

2.5 Utility
2.5.1 Utility—Diagnosis
Performs diagnostic tests on cards installed in the PBX, to identify the source of problems. There are
2 types of test, Card Test and Pair Port Test (KX-TDA100/KX-TDA200/KX-TDA600 only).
If any of the tests listed here returns the result "NG" ("No Good"), contact your dealer. Test results
can be saved as a TXT-format (text) file.
When testing is complete, any cards that were set to OUS status must be returned to INS status if
they are to be used again.
Card Test
Tests the relevant functions of a card to ensure that it is operating correctly. The tests carried out vary
according to the type of card being tested.
The tests that are performed on each card are as follows:
A check mark indicates that the test is available for that card.
KX-TDA50
Local loop back diagnosis
Card CT Bus diagnosis
DTMF Receive test port
MSG/SVM Card DTMF receive
test
EXT-CID path test
48 PC Programming Manual