Panasonic KX-TDA50 Programming Manual page 675

Error Log for Centralized VM—Network MSW Transmission (Buffer)
Enables error information to be logged in the PBX if the quantity of network message waiting
information being re-transmitted is larger than the transmission buffer.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
2.15.1 [9-1] TIE Table—Enhanced QSIG Call Information (Optional SD Card Required)
Feature Manual References
1.13.14 Private Network Features—Centralized Voice Mail
Remote
Remote—Analog Remote (Modem) Floating Extension Number
Specifies the floating extension number for analog remote maintenance. To enable this setting, an
RMT card must be installed, and Remote—Remote Programming on this screen must be enabled.
Default
599
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Manual References
1.13.6 PC Programming
Remote—Remote Programming
Enables system programming, diagnosis, and data upload from a remote location.
Default
Enable
2.17 [11] Maintenance
PC Programming Manual 675