Panasonic KX-TDA50 Programming Manual page 363

2.8.5 [2-4] Week Table
2.12.6 [6-6] Tenant—Music On Hold
Feature Manual References
1.11.4 Music on Hold
1.17.3 Tenant Service
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain
extensions are restricted as determined by the Internal Call Block feature. Also, when calls are
forwarded or overflowed to a CO line, the TRS assigned for the COS of the incoming call distribution
group applies.
Default
1
Value Range
1–64
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
2.8.12 [2-7-2] Class of Service—External Call Block
2.8.13 [2-7-3] Class of Service—Internal Call Block
Feature Manual References
1.3.19 COS (Class of Service)
1.9.14 Internal Call Block
1.17.6 TRS (Toll Restriction)
CLIP on G-DN Button (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the CLIP number sent to the network when making calls using the ICD Group button.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
2.9 [3] Group
PC Programming Manual 363