9] Private Network; 9-1] Tie Table - Panasonic KX-TDA50 Programming Manual

2.15 [9] Private Network

2.15.1 [9-1] TIE Table

A TIE line is a privately leased communication line between two or more PBXs, which provides cost
effective communications between company members at different locations.
A maximum of 32 TIE Line Routing and Modification Tables can be programmed. It is necessary to
make unified tables with all PBXs at different locations in a TIE line network in order to identify the
CO line route to be used when an extension makes or receives a TIE line call.
There are two types of routing methods: the Extension Number Method, where all extensions in the
network are given a unique extension number; and the PBX Code Method, where each PBX is given
a unique code, which is dialed before the extension number to call an extension at another PBX.
Two priority sets (from a total of 8) are displayed at a time. To display other priority sets, click the
applicable tab.
Using a private network, up to 8 PBXs can share one VPS (centralized VM) connected to another
PBX. This VPS can provide voice mail for extensions attached to any of the PBXs in the network.
Only extension numbers of 4 digits or less, using the Extension Number Method, are supported.
Own PBX Code
Specifies the PBX code of the local PBX, when using PBX Code Method numbering on a TIE line
network. If this cell is left empty, the Extension Number Method is used.
Default
Not stored.
Value Range
Max. 7 digits (consisting of 0–9)
Maintenance Console Location
2.15.1 [9-1] TIE Table
Programming Manual References
None
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
Priority 1–Priority 8
Leading Number
Specifies the leading number for other PBX extension numbers or the PBX code of others in the TIE
line network.
Default
Not stored.
2.15 [9] Private Network
PC Programming Manual 629