Panasonic KX-TDA50 Programming Manual page 601

Default
Local / International Call Data 1–10: 3
Long Distance Code: 0
Value Range
0–9
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.3.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits.
Default
Local / International Call Data 1–10: Not stored.
Long Distance Code: 1 (fixed)
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.3.1 Caller ID
ISDN CLIP Modification (KX-TDA100/KX-TDA200/KX-TDA600 only)
When incoming caller information is sent through an ISDN line and the type of the network numbering
plan is International, National, or Subscriber, the caller's number can be modified as programmed in
the Modification Tables assigned to the trunk group. The modified number will then be recorded, and
it is used for sending to the network as a CLIP number.
A maximum of 4 ISDN CLIP Modification Tables can be programmed. Select the desired table from
the Modification Table list.
2.12 [6] Feature
PC Programming Manual 601