1-1] Slot-Lco Card Property - Panasonic KX-TDA50 Programming Manual

Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.8 [1-1] Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.8 [1-1] Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
2.7.10 [1-1] Slot—LCO Card Property
The properties of the analog CO line cards can be specified.
Outgoing Guard Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
3 s
2.7 [1] Configuration
PC Programming Manual 107