Panasonic KX-TDA50 Programming Manual page 50

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50:
Table of Contents

Advertisement

2.5 Utility
To perform a card test
1.
From the Utility menu, select Diagnosis.
2.
Click on the Status cell of the card to be tested, and set it to "OUS".
With the KX-TDA50, to perform the EXT-CID path test, set the status of both the EXT-CID card
and the card in slot 1 to "OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the Card Test option.
A new window will be displayed.
5.
Click OK to perform the test(s).
The error report will be displayed. When all tests are completed, the words "Test End!" will be
shown on the last line of the output.
6.
Select an option:
Click Capture if you want to save the displayed information.
1.
2.
Click Cancel to return to the Diagnosis screen.
Pair Port Test (KX-TDA100/KX-TDA200/KX-TDA600 only)
Tests the combination of an extension port and CO line port to ensure that communication with the
CO line port can be carried out successfully.
The pair port test can be carried out using one LCOT or ELCOT card and one DHLC, SLC8, SLC16,
MSLC16, ESLC16, EMSLC16 or CSLC16 card.
Note
With the KX-TDA600, the pair of cards to be used for the pair port tests must be installed within
the same shelf.
The tests that are performed are as follows:
Line current OFF (Ext—>CO)
Line current ON (Ext—>CO)
Off hook detection (CO—>Ext)
DTMF detection (CO—>Ext)
DP detection (CO—>Ext)
BELL detection (Ext—>CO)
Speech path (Ext—>CO)
Speech path (CO—>Ext)
To perform a pair port test
1.
From the Utility menu, select Diagnosis.
2.
Click on the Status cell of the extension card to be tested, and set it to "OUS".
3.
Click on the cell showing the card type.
50
PC Programming Manual
Enter a file name, or select a file to overwrite.
Click Save.
Line current from extension to CO line turns off.
Line current from extension to CO line turns on.
Off-hook generation/detection from CO line to
extension
DTMF generation/detection from CO line to extension
DP generation/detection from CO line to extension
BELL generation/detection from extension to CO line
Speech path from extension to CO line
Speech path from CO line to extension

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda600

Table of Contents