AudioCodes MediaPack MP-11X User Manual page 298

ini File Field Name
Web Parameter Name
FwdInfo
SIP User's Manual
Table 6-10: Analog Telephony Parameters
Valid Range and Description
Forwards IP-to-Tel calls (using 302 response) based on the gateway's port
to which the call is routed (applicable only to FXS.
[FwdInfo]
FORMAT FwdInfo_Index = FwdInfo_Type, FwdInfo_Destination,
FwdInfo_NoReplyTime, FwdInfo_Port, FwdInfo_Module;
[\FwdInfo]
Where,
Type = Forward Type (for a list of options, refer to 'Call Forward' on
page 151).
Destination = Telephone number or URI (number@IP address) to which
the call is forwarded.
NoReplyTime = Timeout (in seconds) for No Reply. If you have set the
Forward Type for this port to No Answer [3], enter the number of
seconds the gateway waits before forwarding the call to the phone
number specified
Port = Port number
Module = Module number (0 - 5)
For example:
[FwdInfo]
FwdInfo 1 = 1,1001,$$,2,$$;
FwdInfo 2 = 1,2003@10.5.1.1,$$,2,$$;
FwdInfo 3 = 3,2005,30,2,$$;
[\FwdInfo]
Notes:
For an explanation on ini file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 253.
The indexing of this ini file parameter table starts with 1.
The numbering of gateway ports starts with 0.
This parameter can appear up to 24 times for MP-124.
To configure the Call Forward table using the Web interface, refer to
'Call Forward' on page 151.
298
MediaPack Series
Document #: LTRT-65409