The Ini File Parameter Reference; Networking Parameters - AudioCodes MediaPack MP-11X User Manual

6.4.4 The ini File Example
Below is an example of an ini file for the VoIP gateway.
;Channel Params
DJBufMinDelay = 75
RTPRedundancyDepth = 1
IsProxyUsed = 1
ProxyIP = 192.168.122.179
[CoderName]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval,
CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 1= g7231,90
[\CoderName]
EnableSyslog = 1
SyslogServerIP = 10.2.2.1
CallProgressTonesFilename = 'CPUSA.dat'
SaveConfiguration = 1
6.5

The ini File Parameter Reference

The subsections below list all the ini file parameters. References to their descriptions in the
Embedded Web Server are provided, except for those ini file parameters that can only be
configured using the ini file (and not the Embedded Web Server).
6.5.1

Networking Parameters

ini File Field Name
Web Parameter Name
EthernetPhyConfiguratio
n
DHCPEnable
EnableLANWatchDog
DNSPriServerIP
SIP User's Manual
Table 6-1: Networking Parameters
Valid Range and Description
Defines the Ethernet connection mode type.
0] = 10 Base-T half-duplex
[1] = 10 Base-T full-duplex
[2] = 100 Base-TX half-duplex
[3] = 100 Base-TX full-duplex
[4] = Auto-negotiate (default)
[6] = 1000 Base-TX half-duplex
[7] = 1000 Base-TX full-duplex
For detailed information on Ethernet interface configuration, refer to
'Ethernet Interface Configuration' on page 365.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'General Parameters' on
page 100.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
256
MediaPack Series
Document #: LTRT-65409