AudioCodes MediaPack MP-11X User Manual page 278

ini File Field Name
Web Parameter Name
AlarmHistoryTableMaxSize
SNMP Trap Parameters
SNMPManagerTableIP_x
SNMPManagerTrapPort_x
SNMPManagerTrapUser_x
SNMPManagerIsUsed_x
SNMPManagerTrapSendingEn
able_x
SNMPTrapManagerHostName
SNMP Community String Parameters
SNMPReadOnlyCommunityStri
ng_x
SNMPReadWriteCommunityStr
ing_x
SNMPTrapCommunityString
SNMP v3 Users Parameters
SNMPUsers_Index
SNMPUsers_Username
SNMPUsers_AuthProtocol
SNMPUsers_PrivProtocol
SNMPUsers_AuthKey
SNMPUsers_PrivKey
SNMPUsers_Group
SIP User's Manual
Table 6-6: SNMP Parameters
Valid Range and Description
Determines the maximum number of rows in the Alarm History
table. The parameter can be controlled by the Config Global Entry
Limit MIB (located in the Notification Log MIB).
The valid range is 50 to 100. The default value is 100.
For a description of this parameter, refer to 'Configuring the SNMP
Managers Table' on page 211.
For a description of this parameter, refer to 'Configuring the SNMP
Managers Table' on page 211.
This parameter can be set to the name of any configured SNMPV3
user to associate with this trap destination. This determines the
trap format, authentication level, and encryption level. By default,
the trap is associated with the SNMP trap community string.
For a description of this parameter, refer to 'Configuring the SNMP
Managers Table' on page 211.
For a description of this parameter, refer to 'Configuring the SNMP
Managers Table' on page 211.
For a description of this parameter, refer to 'Configuring the
Management Settings' on page 208.
For a description of this parameter, refer to 'Configuring the SNMP
Community Strings' on page 212.
For a description of this parameter, refer to 'Configuring the SNMP
Community Strings' on page 212.
For a description of this parameter, refer to 'Configuring the SNMP
Community Strings' on page 212.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
For a description of this parameter, refer to 'Configuring SNMP V3
Users' on page 214.
278
MediaPack Series
Document #: LTRT-65409