Viewing Port Information; Figure 5-75: Shortcut Menu For Viewing Port Information - AudioCodes MediaPack MP-11X User Manual

SIP User's Manual
The table below describes the areas of the graphic display of the MP-11x.
Area
Displays the current status of the channels indicated by its color:
Channel /
Ports
(Red): line not connected (only applicable to FXO gateways)
(Grey): channel inactive
(Blue): handset is offhook
(Green): active RTP stream
You can also view the channel's port settings (refer to 'Viewing Port Information' on
page 243), reset the port (refer to 'Resetting a Channel' on page 244), and assign a
name to the port (refer to 'Assigning a Name to a Port' on page 244).
If clicked, the 'Ethernet Port Information' screen opens displaying Ethernet port
Uplink
configuration settings (refer to 'Viewing Ethernet Port Settings' on page 245).
Currently not supported.
Fail
Currently not supported.
Ready
This area is used for viewing the Active Alarms table. For a detailed description, refer
Alarms
to 'Viewing the Active Alarms Table' on page 246.

5.13.1.2 Viewing Port Information

The Home page allows you to view detailed information on a specific port such as basic,
SIP, RTP/RTCP, and voice settings.
To view port settings, take these 3 steps:
Click the port for which you want to view port settings; a shortcut menu appears.
1.
From the shortcut menu, click Port Settings; the 'Basic Information' screen appears.
2.

Figure 5-75: Shortcut Menu for Viewing Port Information

Version 5.2
Table 5-55: Description of the Areas of the Home Page
Description
243
5. Web-based Management
August 2007