Dtmf & Dialing Parameters; Figure 5-11: Dtmf & Dialing Screen - AudioCodes MediaPack MP-11X User Manual

SIP User's Manual
Coder Name
10, 20 (default), 30,
G.711U-law_VBD
40, 50, 60, 80, 100,
[g711UlawVbd]
120
N/A
T.38
[t38fax]
5.5.1.4 DTMF & Dialing Parameters
The DTMF & Dialing option is used to configure parameters associated with dual-tone
multi-frequency (DTMF) and dialing.
To configure the DTMF and dialing parameters, take these 4 steps:
Open the 'DTMF & Dialing' screen (Protocol Management menu > Protocol
1.
Definition submenu > DTMF & Dialing option).
Version 5.2
Table 5-10: Supported Coders
Packetization Time
Figure 5-11: DTMF & Dialing Screen
Rate Payload Type
Always 64 Dynamic (0-120) N/A
N/A N/A
95
5. Web-based Management
Silence Suppression
N/A
August 2007