AudioCodes MediaPack MP-11X User Manual page 262

ini File Field Name
Web Parameter Name
VLANBronzeServiceClas
sPriority
EnableDNSasOAM
EnableNTPasOAM
VLANSendNonTaggedOn
Native
Multiple IPs Parameters
EnableMultipleIPs
LocalMediaIPAddress
LocalMediaSubnetMask
LocalMediaDefaultGW
LocalControlIPAddress
LocalControlSubnetMask For a description of this parameter, refer to 'Configuring the IP Settings'
LocalControlDefaultGW
LocalOAMIPAddress
LocalOAMSubnetMask
LocalOAMDefaultGW
PPPoE Parameters
EnablePPPoE
SIP User's Manual
Table 6-1: Networking Parameters
Valid Range and Description
For a description of this parameter, refer to 'Configuring the VLAN
Settings' on page 174.
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for DNS services.
VLAN: Determines the traffic type for DNS services.
[1] = OAM (default)
[0] = Control.
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for NTP services.
VLAN: Determines the traffic type for NTP services.
[1] = OAM (default)
[0] = Control.
Specify whether to send non-tagged packets on the native VLAN.
[0] = Sends priority tag packets (default).
[1] = Sends regular packets (with no VLAN tag).
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164.
Enables the PPPoE (Point-to-Point Protocol over Ethernet) feature.
[0] = Disable (default)
[1] = Enable
262
MediaPack Series
Document #: LTRT-65409