Loading The Auxiliary Files Via The Embedded Web Server - AudioCodes MediaPack MP-11X User Manual

5.11.3.1 Loading the Auxiliary Files via the Embedded Web Server

To load an auxiliary file to the gateway using the Embedded Web
Server, take these 8 steps:
Open the 'Auxiliary Files' screen (Software Update menu > Load Auxiliary Files).
1.
Click the Browse button corresponding to the type of file that you want to load.
2.
Navigate to the folder that contains the file you want to load.
3.
Select the file, and then click Open; the name and path of the file appear in the field
4.
next to the Browse button.
Click the Send File button corresponding to the field that contains the name of the file
5.
you want to load.
Repeat steps 2 through 5 for each file you want to load.
6.
To save the loaded auxiliary files to flash memory, refer to 'Saving Configuration' on
7.
page 238.
To reset the gateway, refer to 'Resetting the Gateway' on page 239.
8.
Notes:
SIP User's Manual
•
Saving an auxiliary file to flash memory may disrupt traffic on the
gateway. To avoid this, disable all traffic on the device by performing a
graceful lock (refer to 'Locking and Unlocking the Gateway' on page 236).
•
File names preceded by an exclamation mark (!) are not changeable on-
the-fly and require that the device be reset (e.g., Call Progress Tones
file).
234
MediaPack Series
Document #: LTRT-65409