AudioCodes MediaPack MP-11X User Manual page 232

The following ini file example can be used to activate the Automatic Update mechanism.
# DNS is required for specifying domain names in URLs
DnsPriServerIP = 10.1.1.11
# Load an extra configuration ini file using HTTP
IniFileURL = 'http://webserver.corp.com/AudioCodes/inifile.ini'
# Load Call Progress Tones file using HTTPS
CptFileUrl = 'https://10.31.2.17/usa_tones.dat'
# Update every day at 03:00 AM
AutoUpdatePredefinedTime = '03:00'
# Note: The cmp file isn't updated since it's disabled by default
(AutoUpdateCmpFile).
Note the following:
When HTTP or HTTPS are used, the gateway queries the Web server/s for the
requested files. The ini file is loaded only if it was modified since the last automatic
update. The cmp file is loaded only if its version is different from the version stored on
the gateway's non-volatile memory. All other auxiliary files (e.g., CPT) are updated
only once. To update a previously loaded auxiliary file, you must update the parameter
containing its URL.
To load different configurations (ini files) for specific gateways, add the string '<MAC>'
to the URL. This mnemonic is replaced with the gateway's hardware MAC address,
resulting in an ini file name request that contains the gateway's MAC address.
To automatically update the cmp file, use the parameter CmpFileURL to specify its
name and location. As a precaution (to protect the gateway from an accidental
update), by default, the Automatic Update mechanism doesn't apply to the cmp file.
Therefore, (to enable it) set the parameter AutoUpdateCmpFile to 1.
The following example illustrates how to utilize Automatic Updates for deploying gateway
with minimum manual configuration.
To utilize Automatic Updates for deploying the gateway with
minimum manual configuration, take these 5 steps:
Setup a Web server (e.g., http://www.corp.com) where all configuration files are
1.
located.
For each gateway, pre-configure the following parameter (DHCP / DNS are assumed):
2.
IniFileURL = 'http://www.corp.com/master_configuration.ini'
Create a file named master_configuration.ini with the following text:
3.
# Common configuration for all devices
# ------------------------------------
CptFileURL = 'http://www.corp.com/call_progress.dat'
# Check for updates every 60 minutes
AutoUpdateFrequency = 60
# Additional configuration per device
# -----------------------------------
# Each device loads a file named after its MAC address,
# (e.g., config_00908F033512.ini)
IniFileURL = 'http://www.corp.com/config_<MAC>.ini'
# Reset the device after configuration is updated.
# The device resets after all of the files are processed.
SIP User's Manual 232
MediaPack Series
Document #: LTRT-65409