5.5.9.3
Configuring the Voice Mail (VM) Parameters
The 'Voice Mail' screen is used to configure the Voice Mail (VM) parameters. The VM
application applies only to FXO/CAS gateways. For detailed information on VM, refer to the
CPE Configuration Guide for Voice Mail User's Manual.
Note:
To configure the VM parameters, take these 4 steps:
Open the 'Voice Mail' screen (Protocol Management menu > Advanced
1.
Applications submenu > Voice Mail option).
Configure the Voice Mail parameters according to the table below.
2.
SIP User's Manual
The 'Voice Mail' screen is only available for gateways providing FXO
interfaces.
Figure 5-36: Voice Mail Screen
160
MediaPack Series
Document #: LTRT-65409