Figure 5-28: Hunt Group Settings Screen - AudioCodes MediaPack MP-11X User Manual

To configure the Hunt Group Settings table, take these 5 steps:
Open the 'Hunt Group Settings' screen (Protocol Management menu > Hunt Group
1.
Settings).
From the 'Routing Index' drop-down list, select the range of entries that you want to
2.
edit (up to 24 entries can be configured).
Configure the Trunk Group Settings table according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238.
5.
SIP User's Manual

Figure 5-28: Hunt Group Settings Screen

146
MediaPack Series
Document #: LTRT-65409