AudioCodes MediaPack MP-11X User Manual page 303

SIP User's Manual
ini File Field Name
Web Parameter Name
TimeToSampleAnalogL
ineVoltage
AnalogCallerIDTimimg
Mode
BellcoreCallerIDTypeO
neSubStandard
ETSICallerIDTypeOneS
ubStandard
ETSIVMWITypeOneSta
ndard
BellcoreVMWITypeOne
Standard
Version 5.2
Table 6-10: Analog Telephony Parameters
Determines the frequency at which the analog line voltage is sampled
(after offhook), for detection of the current disconnect threshold.
The valid range is 100 to 2500 msec. The default value is 1000 msec.
Note: Applicable only to FXO gateways.
[0] = Caller ID is generated between the first two rings (default).
[1] = The gateway attempts to find an optimized timing to generate the
Caller ID according to the selected Caller ID type.
Notes:
Applicable only to FXS gateways.
When used with distinctive ringing, the Caller ID signal doesn't change
the distinctive ringing timing.
Selects the Bellcore Caller ID sub-standard.
[0] = Between rings (default).
[1] = Not ring related.
Selects the ETSI FSK Caller ID Type 1 sub-standard (FXS only).
[0] = ETSI between rings (default).
[1] = ETSI before ring DT_AS.
[2] = ETSI before ring RP_AS.
[3] = ETSI before ring LR_DT_AS.
[4] = ETSI not ring related DT_AS.
[5] = ETSI not ring related RP_AS.
[6] = ETSI not ring related LR_DT_AS.
Selects the ETSI Visual Message Waiting Indication (VMWI) Type 1 sub-
standard.
[0] = ETSI VMWI between rings (default)
[1] = ETSI VMWI before ring DT_AS
[2] = ETSI VMWI before ring RP_AS
[3] = ETSI VMWI before ring LR_DT_AS
[4] = ETSI VMWI not ring related DT_AS
[5] = ETSI VMWI not ring related RP_AS
[6] = ETSI VMWI not ring related LR_DT_AS
Selects the Bellcore VMWI sub-standard.
[0] = Between rings (default).
[1] = Not ring related.
Valid Range and Description
303
6. ini File Configuration
August 2007