AudioCodes MediaPack MP-11X User Manual page 273

SIP User's Manual
ini File Field Name
Web Parameter Name
DisableWebConfig
HTTPport
Telnet Parameters
TelnetServerEnable
TelnetServerPort
TelnetServerIdleDisconne
ct
SSHServerEnable
SSHServerPort
Customizing the Web Appearance Parameters
For detailed information on customizing the Embedded Web Server interface, refer to 'Customizing
the Web Interface' on page 63.
UseProductName
UserProductName
UseWebLogo
WebLogoText
LogoWidth
Version 5.2
Table 6-3: Web and Telnet Parameters
Valid Range and Description
[0] = Enable changing parameters from Embedded Web Server
(default).
[1] = Operate Embedded Web Server in 'read only' mode.
HTTP port used for Web management (default is 80).
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 168.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 168.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 168.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 168.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 168.
Determines whether the UserProductName text string is displayed
instead of the default product name.
[0] = Disabled (default).
[1] = Enables the display of the user-defined UserProductName text
string (in the Embedded Web Server interface and in the extracted ini
file).
If enabled, the UserProductName text string is displayed instead of the
default product name.
Text string that replaces the default product name that appears in the
Embedded Web Server (upper right-hand corner) and the extracted ini
file.
The default is 'MediaPack'.
The string can be up to 29 characters.
[0] = Logo image is used (default).
[1] = Text string is used instead of a logo image.
If enabled, AudioCodes' default logo (or any other logo defined by the
LogoFileName parameter) is replaced with a text string defined by the
WebLogoText parameter.
Text string that replaces the logo image. The string can be up to 15
characters.
Width (in pixels) of the logo image.
Note: The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes' displayed
logo.
273
6. ini File Configuration
August 2007