Related Documentation - AudioCodes MediaPack MP-11X User Manual

Cpe & access analog gateways
Hide thumbs Also See for MediaPack MP-11X:
Table of Contents

Advertisement

Related Documentation

Document #
LTRT-523xx (where xx is the
document version)
LTRT-656xx
LTRT-598xx
LTRT-665xx
Warning:
Warning:
Warning:
Note:
Note:
Notes:
SIP User's Manual
SIP Series Reference Manual
MP-11x & MP-124 SIP Release Notes
MP-11x & MP-124 SIP Fast Track Guide
CPE Configuration Guide for IP Voice Mail
Ensure that you connect FXS ports to analog telephone or to PBX-trunk
lines only and FXO ports to CO/PBX lines only.
Disconnect the gateway from the mains and from the Telephone Network
Voltage (TNV) before servicing.
The gateway is supplied as a sealed unit and must only be serviced by
qualified service personnel.
Where 'network' appears in this manual, it means Local Area Network (LAN),
Wide Area Network (WAN), etc. accessed via the gateway's Ethernet
interface.
The terms IP-to-Tel and Tel-to-IP refer to the direction of the call relative to
the AudioCodes device: IP-to-Tel refers to calls received from the IP network
and destined to the PSTN (i.e., telephone connected directly or indirectly to
the device); Tel-to-IP refers to calls received from the PSTN and destined for
the IP network.
Throughout this manual, unless otherwise specified, the term gateway
refers to the MediaPack series.
Throughout this manual, unless otherwise specified, the term MediaPack
refers to the MP-124, MP-118, MP-114, and MP-112 VoIP gateways.
Throughout this manual, unless otherwise specified, the term MP-11x
refers to the MP-118, MP-114, and MP-112 VoIP gateways.
Manual Name
16
MediaPack Series
Document #: LTRT-65409

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-124

Table of Contents