AudioCodes MediaPack MP-11X User Manual page 113

SIP User's Manual
Parameter
MWI Display
[MWIDisplay]
Subscribe to MWI
[EnableMWISubscriptio
n]
MWI Server IP Address
[MWIServerIP]
MWI Subscribe
Expiration Time
[MWIExpirationTime]
MWI Subscribe Retry
Time
[SubscribeRetryTime]
Stutter Tone Duration
[StutterToneDuration]
Conference Parameters
Enable 3-Way
Conference
[Enable3WayConferenc
e]
Establish Conference
Code
[ConferenceCode]
Version 5.2
Table 5-13: Supplementary Services Parameters
[0] Disable = MWI information isn't sent to display (default).
[1] Enable = MWI information is sent to display.
If enabled, the gateway generates an MWI FSK message that is displayed
on the MWI display.
Note: This parameter is applicable only to FXS modules.
[0] Disable = Disable MWI subscription (default).
[1] Enable = Enable subscription to MWI (to MWIServerIP address).
Note: Use the parameter SubscriptionMode (described in Proxy &
Registration Parameters on page 82) to determine whether the gateway
subscribes separately per endpoint of for the entire gateway.
MWI server IP address. If provided, the gateway subscribes to this IP
address.
The MWI server address can be configured as a numerical IP address or
as a domain name. If not configured, the Proxy IP address is used instead.
MWI subscription expiration time in seconds.
The default is 7200 seconds. The range is 10 to 72000.
Subscription retry time in seconds.
The default is 120 seconds. The range is 10 to 7200.
Duration (in msec) of the played Stutter dial tone, which indicates that Call
Forwarding is enabled or that there is a waiting message(s).
The default is 2,000 (i.e., 2 seconds). The range is 1,000 to 60,000.
The Stutter tone is played (instead of a regular Dial tone), when a Call
Forward is enabled on the specific port or when MWI is received. The tone
is composed of a Confirmation tone, which is played for a user-defined
duration (StutterToneDuration), followed by a Stutter tone. Both tones are
defined in the CPT file.
Notes:
This parameter is applicable only to FXS gateways.
The Message Waiting Notification (MWI) tone takes precedence over
the Call Forwarding Reminder tone. For detailed information on
Message Waiting Indication (MWI), refer to Message Waiting Indication
on page 360.
Enables or disables the 3-Way Conference feature.
Valid options include:
[0] Disable = Disable (default)
[1] Enable = Enables 3-way conferencing
Defines the digit pattern that once detected, generates the Conference-
initiating INVITE when Enable3WayConference is set to 1.
The valid range is a 25-character string. The default is "!" (Hook-Flash).
Description
113
5. Web-based Management
August 2007