AudioCodes MediaPack MP-11X User Manual page 296

ini File Field Name
Web Parameter Name
TargetOfChannel
SIP User's Manual
Table 6-10: Analog Telephony Parameters
Valid Range and Description
Defines telephone numbers that are automatically dialed when a specific
port is used.
Format of this ini file parameter table:
[TargetOfChannel]
FORMAT TargetOfChannel_Index = TargetOfChannel_Destination,
TargetOfChannel_Type, TargetOfChannel_Port,
TargetOfChannel_Module;
[\TargetOfChannel]
Where,
Destination = Destination phone number
Type = following values:
[1] = Destination phone number is automatically dialed if phone is
offhooked (for FXS gateways) or ring signal is applied to port (FXO
gateways).
[0] = automatic dialing is disabled.
[2] = enables Hotline -- when a phone is offhooked and no digit is
pressed for HotLineToneDuration, the destination phone number is
automatically dialed.
Port = Port number
Module = Module number (0 - 5) N/A
For example:
[TargetOfChannel]
TargetOfChannel 2 = 108,1,7,$$;
[\TargetOfChannel]
Notes:
For an explanation on ini file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 253.
The indexing of this ini file parameter table starts with 1.
The numbering of channels starts with 0.
Define this parameter for each gateway port that implements Automatic
Dialing.
This parameter can appear up to 8 times for 8-port gateways and up to
24 times for MP-124 gateways.
To configure the Automatic Dialing Table using the Web interface, refer
to 'Automatic Dialing' on page 149.
296
MediaPack Series
(Automatic dialing on port 7)
Document #: LTRT-65409