Snmp Parameters - AudioCodes MediaPack MP-11X User Manual

SIP User's Manual
ini File Field Name
Web Parameter Name
RadiusLocalCacheMode
RadiusLocalCacheTimeo
ut
RadiusVSAVendorID
RadiusVSAAccessAttribu
te
6.5.6

SNMP Parameters

ini File Field Name
Web Parameter Name
DisableSNMP
SNMPPort
SNMPTrustedMGR_x
KeepAliveTrapPort
SendKeepAliveTrap
SNMPSysOid
SNMPTrapEnterpriseOid
acUserInputAlarmDescription
acUserInputAlarmSeverity
Version 5.2
Table 6-5: RADIUS Parameter
Valid Range and Description
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 197.
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 197.
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 197.
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 197.
Table 6-6: SNMP Parameters
For a description of this parameter, refer to 'Configuring the
Management Settings' on page 208.
The device's local UDP port used for SNMP Get/Set commands.
The range is 100 to 3999. The default port is 161.
Up to five IP addresses of remote trusted SNMP managers from
which the SNMP agent accepts and processes get and set
requests.
Notes:
If no values are assigned to these parameters any manager can
access the device.
Trusted managers can work with all community strings.
The port to which the keep-alive traps are sent.
The valid range is 0 - 65534. The default is port 162.
When enabled, this parameter invokes the keep-alive trap and
sends it every 9/10 of the time defined in the parameter defining
NAT Binding Default Timeout.
[0] = Disable
[1] = Enable
Defines the base product system OID.
Default is eSNMP_AC_PRODUCT_BASE_OID_D.
Defines a Trap Enterprise OID.
Default is eSNMP_AC_ENTERPRISE_OID.
The inner shift of the trap in the AcTrap subtree is added to the
end of the OID in this parameter.
Defines the description of the input alarm.
Defines the severity of the input alarm.
277
Valid Range and Description
6. ini File Configuration
August 2007