G20 Isdn Bri Gateway Details - Avaya one-X Quick Edition System Administration Manual

Chapter 2: Configuring the System
Figure 4: A10 Analog Telephone Adapter Installation

G20 ISDN BRI Gateway Details

There are five major steps involved in the installation and configuration of the G20 ISDN BRI
Gateway (BRI):
1. Install the Quick Edition telephones (refer to the installation document in the phone box).
2. Purchase DDI/MSN lines and protocol information from your service provider.
3. Install the G20 on the LAN (refer to
installation document in the G20 box).
4. Assign SIP Proxy Identities
Tip:
The G20 is shipped with a default IP address (192.168.123.10).
Tip:
5. Map the identities (see
30
Avaya one-X Quick Edition Release 3.1.0 System Administration Guide
Figure 5: G20 ISDN BRI Gateway Installation
(refer to page 68 for complete SIP procedures).
To configure the G20 on page 31).
or the
May 2007