[Winf] Mark A Line For Writing Into The Info Buffer - CAB A+ Series Programming Manual

Special Functions
381
[WINF]
[WINF] marks a line to be written in the info buffer. This can be recalled with the "ESC i" command.
This value will be set if the label is completely processed.
Syntax:
Example:
This example prints a label with a counter - starting at 1000 and incrementing by 4. When the label is
completely processed, the value of the counter will be written into the WINF buffer.
Completely processed means, that a label in demand mode will write the value into the WINF buffer if it
is printed and removed from the demand photo cell.
The selected value for the WINF buffer can also be marked as invisible ( non-printing) using the [I]
command.
Requesting this value can be done with the „ESC i" command. In our example we would receive the
values 1000, 1004, 1008 , 1012 ...... etc.
This command is useful if it needs to be controlled that the last label has been totally processed before
the next label will be sent.
Please note: The maximum length is 128 characters.
cab Produkttechnik GmbH & Co KG
Mark a line for writing into the info buffer
[WINF]
[WINF] - Mark line for writing into the info buffer
m m
J
S l1;0,0,68,71,100
T 5,6,0,3,3;[SER:1000,4][WINF]
A500
381
381