Reflex Mark Dimensions - CAB XC Series Operator's Manual

8 Media
8.3

Reflex Mark Dimensions

Labels with reflex marks
Fig 20 Reflex mark dimensions
Dim. Designation
A Label distance
L Width of reflex mark
M Height of reflex mark
X Distance mark - material edge
Z Distance virtual label front edge - actual label front edge
 Adjust software settings
• Reflex marks must be on the back side of the material (liner).
• Label sensor for reflex marks on the top side on request.
• Specification is valid for black marks.
• Recognition of colored marks may fail.  Preliminary tests are needed.
Table 10 Reflex mark dimensions
Endless material with reflex marks
27
Dim. in mm
> 2
> 5
3 - 10
5 - 53
0 up to A /
recomm. : 0