Reflex Mark Dimensions - CAB A+ Operator's Manual

32 8 Media
8.3

Reflex Mark Dimensions

Labels with reflex marks
Fig. 21
Dim. Designation
A Label distance
L Width of reflex mark
M Height of reflex mark
X Distance mark - material edge
Z Distance virtual label front edge - actual label front edge
 Adjust software settings
•
•
•
•
Table 10
virtual label front edge
reflex mark
Reflex mark dimensions
for A2+
for A4+, A4.3+, A6+, A8+
Reflex marks must be on the back side of the material (liner).
Label sensor for reflex marks on the top side on request.
Specification is valid for black marks.
Recognition of colored marks may fail.  Preliminary tests are needed.
Reflex mark dimensions
Endless material with reflex marks
32
Dim. in mm
> 2
> 5
3 - 10
5 - 26
5 - 53
0 up to A /
recomm. : 0