CAB A+ Series Programming Manual page 64

64
a - ASCII Dump Mode
The following example shows that something is wrong in the text line. We used a font (font number 20
which is maked in bold charcters in the sample below and which is not available in the printer. This is
recognized by the printer which points us to the line which needs to be corrected.
There is no list of "possible Protocol errors" as nearly everything which can not be interpreted by the
printer can be shown in the printer´s display or in the printout of the ASCII dump mode.
Pressing the blinking "pause button" skips the most Protocol errors and finishes the label ( unless
there is some content which is totally wrong or if no label size is defined)
Pressing the printer´s "cancel button" cancels the print job.
Example:
If „protocol errors" are shown on the label means, that there is a mistake in the program code!
cab Produkttechnik GmbH & Co KG
;a
m m
J
S l1;0,0,68,70,100
T 25,25,0,20,13;ASCII Dump Mode
A 1
f
64
64