S - Set Date/Time - CAB A+ Series Programming Manual

83

s - set Date/Time

Used to set date and time to be recalled on a label. The printer has an internal real time clock which
keeps date and time. If it is required this command can be used to synchronize the attached device and
the printer.
Syntax:
Example:
cab Produkttechnik GmbH & Co KG
s n[ss] CR
s = Set date / time command.
n = ASCII - string in following format to adjust date and time in the
printer of following format: YYMMDDhhmmss
YY
MM
DD
hh
mm
[ss]
s 081105091500
Sets printer date and time to:
November 24, 2008 9:15 a.m.
= Year - 2 digits
(values between 70 and 99 are interpreted as
1970-1999. Anything else is treated as year2000)
= Month. - 2 digits
= day - 2 digits
= hour - 2 digits
= minutes - 2 digits
= seconds - 2 digits
(setting of ss is optional)
83
83