CAB A+ Series Programming Manual page 253

253
M - Memory Card Access - store data
Syntax:
Example:
Saves the label „ADDRESS" on the printer´s memory card. This label will automatically print 5 labels
when it is recalled .
A label will immediatly start printing when the printer is switched on, if the label has been saved with the
reserved name „DEFAULT.LBL" !
Files are saved on the memory card in UNICODE format ! An editor which can handle Unicode files is
required to edit these files. Wordpad can be used as editor for Unicode files. Notepad is not able to
handle that file format.
IMPORTANT NOTE: The „Ms" command causes the printer to save a label to the memory card, which
is plugged into a printer.
Do NOT use this command, if the data is saved by FTP directly to the memory card or if the data is
saved directly on a memory card which is plugged in a PC.
This would cause a infinite loop on the printer, as the printer tries to recall the label where the first
command tells to save the label on card and so on - and the display would show „Memory overflow".
cab Produkttechnik GmbH & Co KG
M s type;[path]name CR
M s... - Memory card: store data on card. Stores data on memory card.
type= LBL (label),
FNT (font),
IMG (image),
FMT (label format)
path = optional parameter to select the pathname where the files are
located.
= /card/
= /iffs/
= /cfext/
= /pccard/
= /usbmem/ - saves the file in the USB memory
name = File name of the file which shall be saved on memory card
Ms LBL;ADDRESS
S l1;0,0,36,38,89
T:Text1;20,10,0,3,pt25;Worldwide
A5
Ms LBL
Leaving this option blank saves automatically the
content on the Default memory card.
- saves the file on the optional compact flash
card.
- saves the file in the internal flash file system
- saves the file on the external Compact Flash card
- saves the file on the PCMCIA card
253
253