Escs Printer Status Query - CAB A+ Series Programming Manual

51
ESCs Printer status query
ESCs Printer status query,which responds through the interface
Syntax:
cab Produkttechnik GmbH & Co KG
ESCs
Answer: XYNNNNNNZ
where:
X = Online (Y=Yes, N=No)
Y = Type of error:
NNNNNN = amount of labels to print
Z = Interpreter active (Y=Yes = print job is in process,
Error types:
- --------------------------------------------------------------------------------- No error
a ---- Applicator error- ----- Applicator did not reach the upper position
b ---- Applicator error- ------ Applicator did not reach the lower position
c ---- Applicator error– ------------------------------ Vacuum plate is empty
d ---- Applicator error- ------------------------------------- Label not deposit
e ---- Applicator error- ----------------------------------------- Host stop/error
f ----- Applicator error- -------------------------- Reflective sensor blocked
g ---- Applicator error --------------------------------------- Tamp pad 90° error
h ---- Applicator error ----------------------------------------- Tamp pad 0° error
i ----- Applicator error -------------------------------- Table not in front position
j ----- Applicator error -------------------------------- Table not in rear position
k ---- Applicator error --------------------------------------------------- Head liftet
l ----- Applicator error -------------------------------------------------- Head down
m ------------------------------------------------------------- Scanresult negative
n ------------------------------------------------------------- global Network error
(this can be: no link, no timeserver, no SQL client,
no SMTP server, no DHCP server or IP adress conflict)
o -------------------------------------------------------------- Compressed air-error
r ---------------------------------------------------------------------------- RFID -error
s ------------------------------------ System fault (immediately after power on)
u ----------------------------------------------------------------------------- USB error
... continued on the next page...
N=No= printer in Standby mode)
(1)
(1)
(1)
(1)
(1)
(1)
(4)
(3)
51
51