Z - Print Slashed / Unslashed Zero - CAB A+ Series Programming Manual

91
z - print slashed / unslashed zero
The default setting for the zero character is unslashed. With this command the printer can be forced to
change the style of the zero character. It can be printed as 0 (unslashed) or Ø (slashed).
This command can only be used with internal bitmap fonts. It is not available for internal vectorfonts
(Swiss, Swiss bold and Monotype) or for truetype fonts: The selected method is valid for the complete
label.
Syntax:
Example:
cab Produkttechnik GmbH & Co KG
z t CR
z - Select slashed zero
t =
=
z0
J
S l1;0,0,68,71,100
T 25,25,0,-3,x9,y9;1000
A1
Prints the number 1000 with slashed zeroes.
0 - (zero - prints slashed zeros (Ø) )
O -(upper case letter O - prints unslashed zeros (0) )
91
91