Reflex Mark Dimensions - CAB XD4M Operator's Manual

8 Media
26

Reflex Mark Dimensions

8.3
Fig. 20
Dim. Designation
H Print zone height
A Print zone distance
V Feed length
Width of reflex mark
L
Height of reflex mark
M
X Distance mark - middle of media track
= Distance gap/reflective sensor - middle of media track
Y Sensor recognized virtual print zone front edge
•
•
•
•
Table 10
Reflex mark dimensions
Reflex marks must be on the back side of the material (liner).
Material sensor for reflex marks on the top side on request.
Specification is valid for black marks.
Recognition of colored marks may fail.  Preliminary tests are needed.
Reflex mark dimensions
26
Dim. in mm
5 - 1000
> 2
> 7
> 5
3 - 10
-53 - ±0
Front edge of mark