Usage Of This Manual - CAB A+ Series Programming Manual

12

Usage of this manual

•
•
•
•
•
•
cab Produkttechnik GmbH & Co KG
The commands are sorted in different sections. In each section we further sorted the
commands in alphabetical order. We used following structure:
1. ESC commands
2. Commands which start with lower case letters
3. Commands which start with uppercase letters
4. Special content fields sorted by:
a: Time functions
b: Date functions
c: Mathematical functions
d: Special Functions
e:RFID Functions
5. Description of the cab DataBase connector
6. Description of the abc - Basic compiler
7. Appendix A shows a few charts and tables
8.Appendix B contains some tips and tricks shown on special samples
9. Last but not least we added a Unicode character list of the internal
TrueType fonts.
Special Notes and infos are shown in italic characters where the "finger"
to them.
The examples are mostly reduced to the minimum requirements to print a label, to keep it
as simple as possible.
Not all commands are available or all printer types. This depends on if the described
function needs additional equipment such as the RFID functions which are not available in
every machine. Please referto the further documentation of your printer.
In all cases when it was possible we printed an example label, which helps to explain the
function of each command. You may copy or type the sample in your editor to see how it
works.
All examples have been tested and the printouts have been scanned. The original files
have been copied into the sample text to make sure to keep the amount of mistakes on a
minimum. Nevertheless - please inform us whenever you find anything wrong. We will
correct that in the next release of this manual.
12
points
12