CAB A+ Series Programming Manual page 165

165
B - Barcode
Example:
cab Produkttechnik GmbH & Co KG
RSS-14
The first character is a linkage flag which determines if there is a Composite 2D
barcode (see later on the next pages) associated with the bar code. This is the first
character encoded and it should not be included in the DataToEncode property.
The control encodes either a „1" (true) or „0" (false) value as the first character in
the barcode based on the property of the barcode control.
The next 14 characters in RSS14 are the 13 data characters plus an implied check
digit. The check digit is not actually encoded in the barcode (as per the RSS
standards), but should be included as part of the DataToEncode property.
If less than 14 characters are entered in the DataToEncode property, zeroes are
padded to the front after the linkage flag. Non-numeric characters are stripped from
the DataToEncode property.
There is an implied AI for standard for RSS-14 of 01 that should not be part of the
DataToEncode.
m m
J
S l1;0,0,68,71,104
T 5,10,0,5,5;RSS-14
B 10,15,0,RSS14,10,.3;0441234567890
A 1
165
165