Print Positions - CAB A+ Series Programming Manual

13

Print Positions:

The Home position or „Zero point" of a label is shown on the picture below.The „Headline"appears first,
as it is usual on all laser printers etc. Most users prefer to get the printed label „foot first" out of the
printer. This can easily be done when the „O R" command is added to the shown examples.
We did not add this command in the samples to keep a better overview. You may add this whenever it
is required. „O R" rotates the orientation of the label by 180 degrees. So all shown examples which do
not contain the „O R" command have been rotated for a better view in this manual.
feed
direction
(paper
path)
cab Produkttechnik GmbH & Co KG
Home position when the
„O R" command had been
used.
Home position when the „O R" command had been used.
Home position when the
„O R" command had been
used.
Initial Home position
Initial Home position
13
13