a-Series basic compiler
401
abc - PEEK Variables:
command
„os"
„version"
„resolution"
„width"
„transparent"
„mlength"
„direction"
„slength"
„imageheight:name" I
„imagewidth:name" I
„freememory"
„status"
„xstatus"
„xinput"
„xoutput"
„line"
cab Produkttechnik GmbH & Co KG
type:
)
(S=string, I=integer, F=float
S Delivers „cab A-Series" - only for compatibility with Yabasic
F Version of Yabasic
F Resolution of printer in dpi
F Maximum print width in mm
I
Value: 0 or 1.
1 switches off ESC-command interpretation
F measured length of last label distance (mm), if not known it is 0
I
direction of paper move
1 if forward,
-1 if backward and
0 if standing
F stored label distance (mm), if not known or invalid it is 0. This is effectively
the distance of the last defined label before being switched off
gives the height of an image „name" in dots, 0 if not known
gives the width of an image „name" in dots, 0 if not known
I
gives the free main memory (available for abc or Jscript)
S state of the printer (same as ESC s answer string)
S Extended state of the printer (same as ESC z answer string, but without CR)
I
status of the peripheral connector input pin (XSTART)
I
reads actual peripheral control bits
I
number of the actually printed label
description
401
401