E Rfid - Define Files (Extension Rfid) - CAB A+ Series Programming Manual

223

E RFID - Define Files (Extension RFID)

Define parameters for RFID tag. ( Requires that the cab RFID unit is installed )
Syntax:
Example:
cab Produkttechnik GmbH & Co KG
E RFID;T:tagtype[,R:Retries][,C:cp][,P:pos][E:power] CR
E - Define Extension
tagtype = Auto (detects Tagtype automatically) - (get system info)
Auto is default value.
ISO 15693
retries = 0-10 Amount of retries to read or write a tag if internal
errors occur. (default value is 0)
cp = codepage for data conversion:
Auto = codepage from the setup
name= name of the codepage ( must be identical to the
codepage names in the setup.
pos = -10 ... +20 Reading position relatively to the printhead.
(default value is 0)
power = field strength (default is the value from the setup)
S = normal
H = high
E RFID;T:ISO 15693,R:2,cp:Auto,pos:-3,E:H
This command is not available on printers with separate RFID interface.
(A+ series)
ISO 15693 tags, fixed block size 32 bits
223
223