T - Run Printer Self-Test - CAB A+ Series Programming Manual

84

t - Run Printer Self-test

cab printers have multiple built in self -tests. A self test can be processed through the printer´s
control panel (see operator´s manual) or by software.
The printout of the status information may look different on different printer types. Information about
optional equipment, such as interfaces, cutter etc. will only be shown if they are attached.
Syntax:
cab Produkttechnik GmbH & Co KG
t{n} CR
t - run printer selftest
n = 0 - prints status information
= 1 - prints the font list
= 2 - prints the device list
= 3 - prints the label profile
= 4 - reserved
= 5 - prints the test grid
= 6 - wireless network status (requires installed WLAN card) *
= 7 - RFID measurement (requires installed cab RFID reader)**
The status test is displayed in the selected language of the printer.
* Only available for printers which support the WLAN card (X2 board)
** Only available on Mach 4.
84
84