A - Ascii Dump Mode - CAB A+ Series Programming Manual

63
a - ASCII Dump Mode
The a command starts the ASCII dump mode. The ASCII dump mode shows all received data and is a
very important instrument to detect wrong data in the program code.
The printer´s LCD panel shows „ASCII dump mode" in the selected language.
All received data is printed „transparent" and the printer doesn´t interpret it.
The ASCII Dump Mode is also selectable through the navigator pad.
Note: After ASCII Dump Mode is selected you must confirm this selection with the ENTER button of the
navigator pad.
Syntax:
The following data creates a label with one line of text. Please view the picture below which shows the
same label in ASCII Dump mode.
If „protocol errors" are shown on the label means, that there is a mistake in the program code!
cab Produkttechnik GmbH & Co KG
a CR
a
m m
J
S l1;0,0,68,70,100
T 25,25,0,3,13;ASCII Dump Mode
A1
f
63
63