Writing; Storage Device Functions; Load Label - CAB SQUIX Configuration Manual

14 Storage Devices
14.4

Writing

The storage devices can be written to in several ways. The most functionally secure way is writing to the storage
device via a data interface.
!
Attention!
The device selected as Default storage is written to by default. To write to another device specify the path
name of the device in the file name ( Programming Manual).
Example:
With direct programming, the command sequence for saving a label (file XYZ) has the following form:
Ms LBL; XYZ
J
H 100,0,T
S l1;0,0,68,71,104
T 10,10,0,3,pt15;memory card
A 1[NOPRINT]
Ms LBL
After transfer of the command sequence, the file XYZ is saved with the commands from J to A.
•
Only one label is printed each time the file XYZ is called up.
•
The [NOPRINT] parameter in command A suppresses the printing of a label when the file is saved.
•
• To print the label a variable number of times, use command A [?].
14.5

Storage Device Functions

14.5.1

Load Label

Labels whose descriptions are saved on the storage device can be printed using the Load label function.
 Start menu.
 Select Storage > Load label.
The display shows the selection of external storage devices and the label files stored on the devices.
 Select a label and confirm with
If a label is selected which was saved with a fixed contents and fixed label quantity, the print job is started
immediately.
If additional input on the label description is required, the display requests to enter the variable data.
For label descriptions with a variable label quantity, a prompt to enter the label quantity is displayed.
 Enter the label quantity/variable data and select
Command for saving the file XYZ
|
|
| Contents of the file XYZ
|
|
End of save command
.
to start the print job.
57