[Ltag; Lock Rfid Tag Area; Ltag ... ] Lock Rfid Tag Area - CAB A+ Series Programming Manual

RFID Functions
386

[LTAG ... ]

Used to lock some blocks in the RFID Tag.
Syntax:
Lock a block of the TAG whereby "start" and "len" are bytes. First address in a TAG is " 0 ".
Depending on the tag structure it is only allowed to lock complete blocks, e.g. if the block size is 4 and
LTAG is 2, then the complete block will be locked.
Example:
The sample above writes new content to the RFID tag ( [WTAG:0] ) and locks the content in the next
line to avoid that it can be changed.
This function requires that the printer is equipped with the optional cab RFID reader
cab Produkttechnik GmbH & Co KG
Lock RFID TAG
[LTAG:start,len]
[LTAG:...] - Lock RFID Tag area
start = start address (Byte)
len = length (Byte)
mm
J
S l1;0,0,68,70,100
T 10,10,0,3,5;CABRFID[SER:1][WTAG:0][I]
T 10,10,0,3,5;[LTAG:0,8][I]
A1
area
386
386