CAB A+ Series Programming Manual page 147

147
B - Barcode
Following modes are available:
Example:
; UPS Maxicode certification labels
m m
J sample message 1
S l1;0,0,68,70,100
O R
B20,25,0,maxicode+mode2;[U:ANSI_TM]96841706672,840,024,1Z12345677
[U:GS]UPSN[U:GS]12345E[U:GS]100[U:GS][U:GS]1/2[U:GS]12[U:GS]N[U:GS]
123 MAIN ST B3F4[U:GS]SALT LAKE CITY[U:GS]UT[U:RS]
;sample message 2
B60,25,0,maxicode+mode2;[U:ANSI_TM]9684170,840,024,1Z12345677
[U:GS]UPSN[U:GS]12345E[U:GS]100[U:GS][U:GS]1/2[U:GS]12[U:GS]N[U:GS]
123 MAIN ST B3 F4[U:GS]SALT LAKE CITY[U:GS]UT[U:RS]
A 1
Please note that there is only a carriage return at the end of the barcode contents and not in the
barcode expression. The barcode must be in one single line
Based on the length of the encoded information it was not possible to display this in another way.
cab Produkttechnik GmbH & Co KG
Maxicode
Mode 2 - developed for the transport industry, Mode 2 encodes zip codes as
numeric data. Usage in USA.
Mode 3 - developed for the transport industry, Mode 3 encodes zip codes as
alphanumeric data. Usage international
Mode 4 - encodes text messages and has a fixed length of 93 characters
Mode 6 - encodes also text messages of 93 characters. This mode is used for
programming the barcode reader.
147
147