Serial Management Port; System I/O Ports; Usb Ports; Gigabit Ethernet Ports - Sun Microsystems Sun Fire V445 Server Administration Manual

Serial Management Port

The serial management port provides the default connection to the system controller
and can access the ALOM prompt and system console output. You can connect to the
serial management port using a VT100 terminal, a tip connection, or a terminal
server.

System I/O Ports

FIGURE 1-10

USB Ports

There are two USB ports on the back panel. These comply with the USB 2.0
specification.
For more information about the USB ports, see

Gigabit Ethernet Ports

The Sun Fire V445 server has four Gigabit Ethernet ports.
20 Sun Fire V445 Server Administration Guide • September 2007
USB ports:
(USB0
USB1)
System I/O Port Locations
DB9 serial port (TTYB)
Gigabit Ethernet ports
"About the USB Ports" on page 95.