Sun Microsystems Sun Fire V445 Server Administration Manual page 246

2. To activate the parameter change, type:
ok reset-all
The system permanently stores the parameter change.
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
Displaying Automatic System Restoration
Information
Use the following command to display information about the status of the ASR
feature.
At the ok prompt, type:
ok .asr
In the .asr command output, any devices marked disabled have been manually
unconfigured using the asr-disable command. The .asr command also lists
devices that have failed firmware diagnostics and have been automatically
unconfigured by the OpenBoot ASR feature.
214 Sun Fire V445 Server Administration Guide • September 2007