About Openboot Commands; Probe-Scsi-All; Probe-Ide - Sun Microsystems Sun Fire V445 Server Administration Manual

OpenBoot Diagnostics Error Messages
OpenBoot Diagnostics error results are reported in a tabular format that contains a
short summary of the problem, the hardware device affected, the subtest that failed,
and other diagnostic information. The following example displays a sample
OpenBoot Diagnostics error message.
CODE EXAMPLE 8-2
Testing /pci@1e,600000/isa@7/flashprom@2,0
ERROR : There is no POST in this FLASHPROM or POST header is
unrecognized
DEVICE : /pci@1e,600000/isa@7/flashprom@2,0
SUBTEST : selftest:crc-subtest
MACHINE : Sun Fire V445
SERIAL# : 51347798
DATE : 03/05/2003 15:17:31
CONTR0LS: diag-level=max test-args=errors=1
Error: /pci@1e,600000/isa@7/flashprom@2,0 selftest failed, return code = 1
Selftest at /pci@1e,600000/isa@7/flashprom@2,0 (errors=1) .............
failed
Pass:1 (of 1) Errors:1 (of 1) Tests Failed:1 Elapsed Time: 0:0:0:1

About OpenBoot Commands

OpenBoot commands are commands you type from the ok prompt. OpenBoot
commands that can provide useful diagnostic information are:

probe-scsi-all

probe-ide

show-devs
probe-scsi-all
The probe-scsi-all command diagnoses problems with the SAS devices.
Caution – If you used the halt command or the Stop-A key sequence to reach the
ok prompt, then issuing the probe-scsi-all command can hang the system.
182 Sun Fire V445 Server Administration Guide • September 2007
OpenBoot Diagnostics Error Message
GMT